x
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Preface
Cisco IOS XE
Release 3.4.0S
OL-14126-10 July 25, 2011 Added information about the following
SPAs:
• SPA-2CHT3-CE-ATM
(Asynchronous Transfer Mode only)
• SPA-24CHT1-CE-ATM (Circuit
Emulation mode only)
Added information pertaining to feature
change for CPU-Usage show command.
Cisco IOS XE
Release 3.3.0S
OL-14126-09 March 30, 2011 Added information about the following
SPAs:
• 1-Port 10-Gigabit Ethernet
LAN/WAN-PHY SPA
• 1-Port Channelized OC-3 STM1
ATM Circuit Emulation over Packet
(CEoP) SPA (Circuit Emulation
Mode only)
Cisco IOS XE
Release 3.2S
OL-14126-08 November 24, 2010 Added information about the following
SPAs:
• 2-Port Gigabit Synchronous Ethernet
SPA
• SPA-DSP
Information added for supporting SIP-40
and ESP-40 on Cisco ASR 1004 Router.
Cisco IOS XE
Release 3.1S
OL-14126-07 July 23, 2010 Added information about:
• Cisco ASR1000-SIP40 in Cisco IOS
XE Release 3.1S (the new hardware
SIP)
• default maximum bandwidth of
SIP-10 when SIP-40 is downgraded
to SIP-10
Release No. Revision Date Change Summary
To Next Page
Loading...
