3-80
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
24-Port Channelized T1/E1/J1 ATM CEoP SPA Overview
Table 3-49 describes the 24-Port Channelized T1/E1/J1 CEoP SPA LEDs.
24-Port Channelized T1/E1/J1 CEoP SPA Interface Specifications
The physical layer interface for the 24-Port Channelized T1/E1/J1 CEoP SPA is a customer-installed
high-density connector. This connector has thumbscrews that should be screwed into the SPA when the
cable is installed.
24-Port Channelized T1/E1/J1 CEoP SPA Cables and Connectors
The 24-Port Channelized T1/E1/J1 CEoP SPA requires a Cisco cable (part number CABLE-24T1E1J1),
which is shown in Figure 3-54.
Figure 3-54 24-Port Channelized T1/E1/J1 CEoP SPA High-Density Cable
Table 3-52 24-Port Channelized T1/E1/J1 CEoP SPA LEDs
LED Label Color State Meaning
STATUS Off Off SPA power is off.
Amber On SPA power is on and good, and SPA is being configured.
Green On SPA is ready and operational.
A/C Off Off Port is not enabled by software.
Green On Port is enabled by software.
Amber On Port is enabled by software, and there is at least one alarm.
511
10050
26
1
50
25
250106
To Next Page
Loading...
