xii
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Preface
Organization
This document contains the following chapters:
Cisco IOS XE
Release 2.4
OL-14126-04 June 30, 2009
• Information added for the following
SPAs:
–
2-Port, 4-Port, and 8-Port OC-12
POS SPA
–
1-Port OC-48 POS SPA
–
8-Port OC-3 POS SPA
–
1-Port OC-192 POS SPA
–
Cisco WebEx Node for ASR
1000 Series SPA
• New information on the use of SPA
cable clips to help with removal of
SPAs from a SIP on the Cisco ASR
1000 Series Routers was added.
Cisco IOS XE
Release 2.3
OL-14126-03 November 24, 2008 Information added for the following
SPAs:
• 1-Port and 3-Port OC-3 ATM SPA
Cisco IOS XE
Release 2.2
OL-14126-02 September 10, 2008 Information added for the following
SPAs:
• 2-Port and 4-Port OC-48c/STM-16
POS SPA
• 1-Port Channelized STM-1/OC-3
SPA
Cisco IOS XE
Release 2.1
OL-14126-01 April 25, 2008 First release.
Release No. Revision Date Change Summary
Section Title Description
Chapter 1 SIP and SPA Product Overview Provides an introduction to SPA interface
processors (SIPs) and shared port adapters
(SPAs).
Chapter 2 Overview: Cisco ASR 1000 Series
Aggregation Services Routers SIPs
Provides SIP and SPA compatibility summary.
For each supported SIP, provides a summary of
SIP characteristics and a SIP overview.
Chapter 3 Overview: Cisco ASR 1000 Series
Aggregation Services Routers SPAs
For each supported SPA, provides a summary of
SPA characteristics and a SPA overview.
Chapter 4 Preparing to Install a SIP or a SPA Describes the required tools, equipment, and
safety guidelines for installing SIPs and SPAs.
To Next Page
Loading...
