6-4
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 6 Installing and Removing a SPA
Removing a SPA from a SIP
Figure 6-3 Cisco ASR 1000 Series Cable Clip Versions for SPA Removal
Note The cable clip shown in the following graphics is only an example of one option. Select the cable
clip version most useful in your environment.
Step 2 Hold and position the cable clip with the narrow edge vertically lined up with the open end of the plastic
pull tab that protrudes from the SPA, as shown in Figure 6-4.
Figure 6-4 Installing a Cisco ASR 1000 Series Cable Clip into the SPA Plastic Pull Tab
1 Long clip 3 Small cap clip
2 Short clip
1
2
3
275929
1 Portion of the cable clip that locks into
position
3 SPA
2 SPA plastic pull tab
275931
1
1
3
2
To Next Page
Loading...
