7-9
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 7 Troubleshooting the Installation
Troubleshooting the Hardware
Illegal block #24716 (1515870810) in inode 7.
CLEARED.
Illegal block #24717 (1515870810) in inode 7.
CLEARED.
Illegal block #24718 (1515870810) in inode 7.
CLEARED.
Illegal block #24719 (1515870810) in inode 7.
CLEARED.
Illegal block #24720 (1515870810) in inode 7.
CLEARED.
Illegal block #24721 (1515870810) in inode 7.
CLEARED.
Illegal block #24722 (1515870810) in inode 7.
CLEARED.
Illegal block #24723 (1515870810) in inode 7.
CLEARED.
Illegal block #24724 (1515870810) in inode 7.
CLEARED.
Illegal block #24725 (1515870810) in inode 7.
CLEARED.
Illegal block #24726 (1515870810) in inode 7.
CLEARED.
Too many illegal blocks in inode 7.
Clear inode<y>? yes
Restarting e2fsck from the beginning...
Resize inode not valid. Recreate<y>? yes
APPLICATION contains a file system with
errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #0 (28103,
counted=28104).
Fix<y>? yes
Free blocks count wrong (242639,
counted=242640).
Fix<y>? yes
APPLICATION: ***** FILE SYSTEM WAS MODIFIED
*****
APPLICATION: 12/125696 files (0.0%
non-contiguous), 8367/251007 blocks
3.Exit the SPA console using the exit command, as
shown in the following example:
service-spa# exit
Router#
4. Reload the Cisco WebEx Node SPA using the
hw-module subslot reload command.
Table 7-5 Possible HDD Problems and Solutions on the Cisco WebEx Node SPA (continued)
To Next Page
Loading...
