7-13
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 7 Troubleshooting the Installation
Troubleshooting the Hardware
Block size=1024 (log=0)
Fragment size=1024 (log=0)
26208 inodes, 104420 blocks
5221 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
13 block groups
8192 blocks per group, 8192 fragments per group
2016 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 20 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Creating DATA partition on /dev/sda4 ...
mke2fs 1.40 (29-Jun-2007)
Filesystem label=DATA
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
30146560 inodes, 60269855 blocks
3013492 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
1840 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Creating SWAP space in /dev/sda3 ...
Setting up swapspace version 1, size = 2056315904 bytes
***********************************
Format operation result: SUCCESSFUL
***********************************
service-spa#
Tip The SPA-DSP has neither a CPU nor a hard disk as compared to the WebEx Node SPA. Hence, there are
no CPU error messages or hard disk error messages for a SPA-DSP.
To Next Page
Loading...
