Cisco ASR1004 - ASR 1004 Modular Expansion Base - Page 187

Index
IN-5
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
subslots
description
1-1
numbering 2-5
specifying location in CLI 2-5
small form-factor pluggable
see XFP or SFP
SPA (shared port adapter)
activation (example)
5-9
cable-management brackets 6-10
deactivating 5-5
deactivation (example) 5-9
definition 1-2
double-height description 1-2
handling 6-1
installing 6-2
interfaces 1-2
optics compatibility (table) 1-6, 1-7
reactivating 5-7
removal 5-5, 6-1
single-height description 1-2
SIP compatibility (table) 1-3, 1-4, 1-5
subslot numbering (figure) 2-4
SPA-1X10GE-WL-V2
overview
3-14
troubleshooting 7-14
XFP port cabling 3-18
SPA-DSP 3-72
LED 3-74
SPA interface processors (SIPs) 2-1
subslots
description
1-1
numbering 2-5
specifying location in CLI 2-5
T
troubleshooting the installation 7-1
U
using show commands
to verify SIP and SPA status
6-8
X
XFP (small form-factor pluggable) optical transceiver
modules
for OC-192c/STM-64 POS/RPR XFP SPA
3-41
XFP-10GER-OC192IR 3-16, 3-41, 3-54
XFP-10GLR-OC192SR 3-16, 3-41, 3-54
XFP-10GZR-OC192LR 3-16, 3-54
XFP module 3-16
cabling 3-18
for OC-192c/STM-64 POS/RPR XFP SPA 3-52, 3-54
intermediate reach 3-54
intermediate-reach 3-16
short-reach 3-16
very-long-reach 3-16