Cisco ASR1004 - ASR 1004 Modular Expansion Base - Modular Optics Compatibility

1-6
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 1 SIP and SPA Product Overview
Modular Optics Compatibility
Note The SPAs will only accept the SFP modules listed as supported in this document. An SFP module check
is run every time an SFP module is inserted into a SPA and only SFP modules that pass this check will be
usable.
Table 1-7, Table 1-8, Table 1-9, Table 1-10, Table 1-11, Table 1-12, and Table 1-13 show the types of
optics modules that have been qualified for use with a SPA.
For more information about any of the supported transceivers for SPAs in these tables, refer to the Cisco
Transceiver Modules site for that module on Cisco.com at:
http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html
Table 1-7 ATM SPA Optics Compatibility
SPA Qualified Optics Modules (Cisco Part Numbers)
1-Port Clear Channel OC-3 ATM
SPA
• SFP-OC3-MM
• SFP-OC3-SR
• SFP-OC3-IR1
• SFP-OC3-LR1
• SFP-OC3-LR2
3-Port Clear Channel OC-3 ATM
SPA
• SFP-OC3-MM
• SFP-OC3-SR
• SFP-OC3-IR1
• SFP-OC3-LR1
• SFP-OC3-LR2
1-Port Clear Channel OC-12 ATM
SPA
• SFP-OC12-MM
• SFP-OC12-SR
• SFP-OC12-IR1
• SFP-OC12-LR1
• SFP-OC12-LR2