3-15
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port 10-Gigabit Ethernet SPA Overview
1-Port 10-Gigabit Ethernet SPA LEDs
The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port, and a STATUS
LED, as shown in Figure 3-11.
Figure 3-11 1-Port 10-Gigabit Ethernet SPA Faceplate
Figure 3-12 displays the 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA two LEDs, an
ACTIVE/LINK LED for the port, and a STATUS LED.
Figure 3-12 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA Faceplate
Table 3-7 describes the 1-Port 10-Gigabit Ethernet SPA LEDs.
1 ACTIVE/LINK LED 2 STATUS LED
STATU S
122151
ACTIVE/LINK
SPA-1X10GE-L-V2
1 2
1 ACTIVE/LINK LED 2 STATUS LED
STATU S
246029
ACTIVE/LINK
SPA-1X10GE-WL-V2
1 2
Table 3-7 1-Port 10-Gigabit Ethernet SPA and 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA
LEDs
LED Label Color State Meaning
ACTIVE/LINK Off Off Port is not enabled by software.
Green On Port is enabled by software and the link is up.
Amber On Port is enabled by software and the link is down.
STATUS Off Off SPA power is off.
Green On SPA is ready and operational.
Amber On SPA power is on and good, and the SPA is being configured.
To Next Page
Loading...
