Cisco ASR1004 - ASR 1004 Modular Expansion Base - Page 59

3-17
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port 10-Gigabit Ethernet SPA Overview
Figure 3-14 XFP Module
Table 3-8 XFP Module Specifications for the 1-Port 10-Gigabit Ethernet SPA
Specification Description
Dimensions (H xWx L) .5 in x .72 in x 2.79 in
12.5 mm x 18.35 mm x 71.1 mm
Wavelength (TX) 10GLR SR-1: 1260 nm to 1355 nm
10GER IR-2: 1530 nm to 1565 nm
10GZR LR-2: 1530 nm to 1565 nm
Cabling distance (maximum) 10GLR SR-1: 6.2 miles (10 km)
10GER IR-2: 24.8 miles (40 km)
10GZR LR-2: 50 miles (80 km)
Operating case temperature range 10GLR SR-1: 23 to 158
o
F (–5 to 70
o
C)
10GER IR-2: 23 to 158
o
F (–5 to 70
o
C)
10GZR LR-2: 23 to 158
o
F (–5 to 70
o
C)
Storage temperature range 10GLR SR-1: –40 to 185
o
F (–40 to 85
o
C)
10GER IR-2: –40 to 185
o
F (–40 to 85
o
C)
10GZR LR-2: –40 to 185
o
F (–40 to 85
o
C)
TX power 10GLR SR-1: –8.2 to 0.5 dBm
10GER IR-2: –4.7 to 4 dBm
10GZR LR-2: 0 to 4 dBm
Receiver sensitivity (maximum) 10GLR SR-1: –12.6 dBm
10GER IR-2: –14.1 dBm
10GZR LR-2: –24 dBm
RX overload 10GLR SR-1: 0.5 dBm
10GER IR-2: –1.0 dBm
10GZR LR-2: –7.0 dBm
Maximum receiver power damage 10GLR SR-1: 5 dBm
10GER IR-2: 5 dBm
10GZR LR-2: 5 dBm
129499