Cisco ASR1004 - ASR 1004 Modular Expansion Base - XFP Port Cabling Specifications; 2-Port Gigabit Ethernet SPA Overview; 2-Port Copper and Optical Gigabit Ethernet SPA Leds

3-18
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
2-Port Gigabit Ethernet SPA Overview
XFP Port Cabling Specifications
Table 3-9 shows the port cabling specifications for an XFP module.
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Copper and Optical Gigabit Ethernet SPA:
• 2-Port Copper and Optical Gigabit Ethernet SPA LEDs, page 3-18
• 2-Port Copper and Optical Gigabit Ethernet SPA Cables, Connectors, and Pinouts, page 3-19
2-Port Copper and Optical Gigabit Ethernet SPA LEDs
The 2-Port Copper and Optical Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port
on the SPA, and one STATUS LED, as shown in Figure 3-15.
Figure 3-15 2-Port Copper and Optical Gigabit Ethernet SPA Faceplate
Table 3-10 describes the 2-Port Copper and Optical Gigabit Ethernet SPA LEDs.
Table 3-9 XFP Port Cabling Specifications
XFP Module Wavelength Fiber Type
XFP-10GLR-OC192SR 1310 nm SMF
XFP-10GER-OC192IR 1550 nm SMF
XFP-10GZR-OC192LR 1550 nm SMF
STATU S
0
1
0
1
A/L A/L A/L A/L
SPA-2X1GE-V2
211969
2
1
1 A/L (Active/Link) LED 2 STATUS LED
Table 3-10 2-Port Copper and Optical Gigabit Ethernet SPA LEDs
LED Label Color State Meaning
A/L Off Off Port is not enabled.
Green On Port is enabled and the link is up.
Amber On Port is enabled and the link is down.
STATUS Off Off SPA power is off.