Cisco ASR1004 - ASR 1004 Modular Expansion Base - Page 69

3-27
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
10-Port Gigabit Ethernet SPA Overview
SFP-GE-S Modules
The 1000BASE-SX (short-wavelength) module operates on standard multimode fiber-optic link spans
of up to 1640 feet (500 m) on 50/125um multimode fiber (MMF) and 984 feet (300 m) on 62.5/125um
MMF.
SFP-GE-L Modules
The 1000BASE-LX/LH (long-wavelength/long-haul) module interfaces fully comply with the IEEE
802.3z 1000BASE-LX standard. However, their higher optical quality allows them to reach 6.2 miles
(10 km) over single-mode fiber (SMF) versus the 3.1 miles (5 km) specified in the standard.
SFP-GE-Z Modules
The 1000BASE-ZX (extended-wavelength) module operates on ordinary single-mode fiber-optic link
spans of up to 49.7 miles (80 km). Link spans of up to 62.1 miles (100 km) are possible using premium
single-mode fiber or dispersion-shifted single-mode fiber. (Premium single-mode fiber has a lower
attenuation per unit length than ordinary single-mode fiber; dispersion-shifted single-mode fiber has
both lower attenuation and less dispersion.)
Table 3-16 SFP Module Specifications
Specification Description
Wavelength SFP-GE-S: 770 to 860 nm
SFP-GE-L: 1270 to 1355 nm
SFP-GE-Z: 1500 to 1580 nm
SFP-GE-T: N/A
GLC-GE-100FX: 1270 to 1380 nm
Cabling distance (maximum) SFP-GE-S: 1640 feet (500 m) on 50/125um MMF; 984 feet (300 m)
on 62.5/125um MMF
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-T: 328 feet (100 m)
GLC-GE-100FX: 6562 feet (2 km)
Operating case temperature
range
SFP-GE-S: 23 to 185
o
F (–5 to 85
o
C)
SFP-GE-L: 23 to 185
o
F (–5 to 85
o
C)
SFP-GE-Z: 23 to 185
o
F (–5 to 85
o
C)
SFP-GE-T: 23 to 185
o
F (–5 to 85
o
C)
GLC-GE-100FX: 23 to 185
o
F (–5 to 85
o
C)
Storage temperature range SFP-GE-S: –40 to 185
o
F (–40 to 85
o
C)
SFP-GE-L: –40 to 185
o
F (–40 to 85
o
C)
SFP-GE-Z: –40 to 185
o
F (–40 to 85
o
C)
SFP-GE-T: –40 to 185
o
F (–40 to 85
o
C)
GLC-GE-100FX: –40 to 185
o
F (–40 to 80
o
C)
Supply voltage range SFP-GE-S: 3.1 to 3.5 V
SFP-GE-L: 3.1 to 3.5 V
SFP-GE-Z: 3.1 to 3.5 V
SFP-GE-T: 3.1 to 3.5 V
GLC-GE-100FX: 3.3 to 3.5 V