Cisco ASR1004 - ASR 1004 Modular Expansion Base - OC-3 Module Connections; 1-Port OC-48 C;Stm-16 POS SPA Overview

3-38
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port OC-48c/STM-16 POS SPA Overview
OC-3 Module Connections
Table 3-23 shows the OC-3 specifications of the optics on the 2-Port and 4-Port OC-3c/STM-1 POS SPA.
1-Port OC-48c/STM-16 POS SPA Overview
The 1-Port OC-48c/STM-16 POS SPA provides Packet over SONET (POS) network connectivity with a
bandwidth of 9.95 Gbps.
The following sections describe the 1-Port OC-48c/STM-16 POS SPA:
Table 3-23 OC-3 Specifications
Specification Description
Wavelength OC-3 MM: 1270 nm to 1380 nm
OC-3 SR: 1260 nm to 1360 nm
OC-3 IR-1: 1261 nm to 1360 nm
OC-3 LR-1: 1263 nm to 1360 nm
OC-3 LR-2: 1480 nm to 1580 nm
Cabling distance (maximum) OC-3 MM: 2 km (1.2 miles)
OC-3 SR: 2 km (1.2 miles)
OC-3 IR-1: 15 km (9.3 miles)
OC-3 LR-1: 40 km (24.8 miles)
OC-3 LR-2: 80 km (49.7 miles)
Operating case temperature range OC-3 MM: 23 to 185
o
F (–5 to 85
o
C)
OC-3 SR: 23 to 185
o
F (–5 to 85
o
C)
OC-3 IR-1: 23 to 185
o
F (–5 to 85
o
C)
OC-3 LR-1: 23 to 185
o
F (–5 to 85
o
C)
OC-3 LR-2: 23 to 185
o
F (–5 to 85
o
C)
TX power OC-3 MM: –19 to –14 dBm
OC-3 SR: –15 to –8 dBm
OC-3 IR-1: –15 to –8 dBm
OC-3 LR-1: –5 to 0 dBm
OC-3 LR-2: –5 to 0 dBm
Receiver sensitivity (maximum) OC-3 MM: –30 dBm
OC-3 SR: –23 dBm
OC-3 IR-1: –28 dBm
OC-3 LR-1: –34 dBm
OC-3 LR-2: –34 dBm
RX overload OC-3 MM: –5 dBm
OC-3 SR: –8 dBm
OC-3 IR-1: –8 dBm
OC-3 LR-1: –10 dBm
OC-3 LR-2: –10 dBm
Maximum receiver power damage OC-3 MM: 5 dBm
OC-3 SR: 5 dBm
OC-3 IR-1: 5 dBm
OC-3 LR-1: 5 dBm
OC-3 LR-2: 5 dBm