Cisco ASR1004 - ASR 1004 Modular Expansion Base - OC-12 Module Connections

3-51
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
2-Port, 4-Port, and 8-Port OC-12c/STM-4 POS SPA Overview
Figure 3-34 LC -Type Cables
OC-12 Module Connections
Table 3-30 shows the OC-12 specifications of the optics on the 2-Port, 4-Port, and 8-Port OC-12c/STM-4
Multirate POS SPA.
/ / / /
/ /
TXRX
84929
Table 3-30 OC-12 Specifications
Specification Description
Wavelength OC-12 MM: 1270 nm to 1380 nm
OC-12 SR: 1261 nm to 1360 nm
OC-12 IR-1: 1293 nm to 1334 nm
OC-12 LR-1: 1280 nm to 1335 nm
OC-12 LR-2: 1480 nm to 1580 nm
Cabling distance (maximum) OC-12 MM: 0.5 km (0.3 miles)
OC-12 SR: 2 km (1.2 miles)
OC-12 IR-1: 15 km (9.3 miles)
OC-12 LR-1: 40 km (24.8 miles)
OC-12 LR-2: 80 km (49.7 miles)
Operating case temperature range OC-12 MM: 23 to 185
o
F (–5 to 85
o
C)
OC-12 SR: 23 to 185
o
F (–5 to 85
o
C)
OC-12 IR-1: 23 to 185
o
F (–5 to 85
o
C)
OC-12 LR-1: 23 to 185
o
F (–5 to 85
o
C)
OC-12 LR-2: 23 to 185
o
F (–5 to 85
o
C)
TX power OC-12 MM: –20 to –14 dBm
OC-12 SR: –15 to –8 dBm
OC-12 IR-1: –15 to –8 dBm
OC-12 LR-1: –3 to 2 dBm
OC-12 LR-2: –3 to 2 dBm
Receiver sensitivity (maximum) OC-12 MM: –26 dB
OC-12 SR: –23 dBm
OC-12 IR-1: –28 dBm
OC-12 LR-1: –28 dBm
OC-12 LR-2: –28 dBm