3-52
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA is a single-height SPA that installs in one SIP subslot,
and provides SONET and SDH network connectivity with a bandwidth of 9.95 Gbps.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a 10-Gbps small form-factor pluggable (SFP)
optical receptacle for each port allowing connection to single-mode optical fiber.
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR XFP SPA:
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs, page 3-52
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications, page 3-53
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and
Cables, page 3-53
1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA has six LEDs, as shown in Figure 3-35.
Figure 3-35 1-Port OC-192c/STM-64 POS/RPR XFP SPA Faceplate
RX overload OC-12 MM: –6 dBm
OC-12 SR: –8 dBm
OC-12 IR-1: –8 dBm
OC-12 LR-1: –8 dBm
OC-12 LR-2: –8 dBm
Maximum receiver power damage OC-12 MM: 5 dBm
OC-12 SR: 5 dBm
OC-12 IR-1: 5 dBm
OC-12 LR-1: 5 dBm
OC-12 LR-2: 5 dBm
Table 3-30 OC-12 Specifications (continued)
Specification Description
1 WRAP LED 4 CARRIER LED
2 PASSTHRU LED 5 ACTIVE LED
3 MATESYNC LED 6 STATUS LED
MATE
S YNC
PA SSTHRU
WRAP
CARRIER
ACTIVE
SPA-0C192POS-XFP
STATU S
0
129432
1
2
3 4
5
6
To Next Page
Loading...
