Cisco Catalyst 4500 Series - Page 2067

Index
IN-27
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
power consumption for powered devices
Intelligent Power Management
4
power management modes 2
powering down a module 22
PoE policing
configuring errdisable recovery
14
configuring on an interface 13
displaying on an interface 14
power modes 12
point-to-point
in 802.1X authentication (figure)
3
policing
how to implement
18, 52
See QoS policing
policing IPv6 control traffic
20
policing, PoE 12
policy associations, QoS on Sup 6-E 39, 73
policy map marking action, configuring 23, 57
policy-map command 16, 51
port ACLs
and voice VLAN
5
defined 3
Port Aggregation Protocol
see PAgP
port cost (STP)
configuring
15
port description TLV 2
port numbering with TwinGig Convertors 13
port priority
configuring MST instances
31
configuring STP 13
port security
aging
5
configuring 7
displaying 28
guidelines and restrictions 33
on access ports 7, 22
on private VLAN 14
host 14
promiscuous 16
topology 15, 18, 32
on trunk port 17
guidelines and restrictions 15, 18, 32
port mode changes 22
on voice ports 22
sticky learning 5
using with 802.1X 18
violations 6
with 802.1X Authentication 32
with DHCP and IP Source Guard 31
with other features 33
port states
description
5
port VLAN ID TLV 2
port-based authentication
802.1X with voice VLAN
21
Authentication Failed VLAN assignment 16
authentication server
defined
2
changing the quiet period 84
client, defined 3, 2
configuration guidelines 28, 6
configure ACL assignments and redirect URLs 38
configure switch-to-RADIUS server communication
32
configure with Authentication Failed 71
configure with Critical Authentication 62
configure with Guest-VLANs 57
configure with MAC Authentication Bypass 60
configure with VLAN User Distribution 68
configure with Voice VLAN 73
configuring
Multiple Domain Authentication and Multiple
Authorization
34
RADIUS server 10
RADIUS server parameters on the switch 9
configuring Fallback Authentication 77
configuring Guest-VLAN 32