Index
IN-29
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
Catalyst 4500 Switch power supplies 14
Catalyst 4948 series 23
configuring combined mode 13
configuring redundant mode 12
overview 1
redundancy 7
power management for Catalyst 4500 Switch
combined mode
9
redundant mode 9
power management limitations in Catalyst 4500 Switch 10
power management mode
selecting
10
power management TLV 2, 3, 9
power negotiation
through LLDP
11
power policing, displaying on an interface 14
power redundancy-mode command 13
power supplies
available power for Catalyst 4500 Switch
14
fixed 8
variable 8, 23
powered devices, configuring power consumption 5
Power-On-Self-Test diagnostics 10, 20
Power-On-Self-Test for Supervisor Engine V-10GE 13
pre-authentication open access 8
pre-authentication open access. See port-based
authentication.
preempt delay time, REP
5
primary edge port, REP 4
primary VLANs 2, 4
associating with secondary VLANs 16
configuring as a PVLAN 15
priority
overriding CoS of incoming frames
4
priority queuing, QoS on Sup 6-E 30, 64
private VLAN
configure port security
14, 15
enabling DHCP Snooping 12
private VLANs
across multiple switches
5
and SVIs 10
benefits of 2
community ports 3
community VLANs 2, 3
default configuration 12
end station access to 3
isolated port 4
isolated VLANs 2, 3, 4
ports
community
3
isolated 4
promiscuous 4
primary VLANs 2, 4
promiscuous ports 4
secondary VLANs 2
subdomains 2
traffic in 9
privileged EXEC mode 5
privileges
changing default
23
configuring levels 23
exiting 24
logging in 24
promiscuous ports
configuring PVLAN
17
defined 4
setting mode 24
protocol timers 4
provider edge devices 2
PRTU, managing software licenses 14
pruning, VTP
See VTP pruning
pseudobridges
description
25
PVACL 19
PVID (port VLAN ID)
and 802.1X with voice VLAN ports
21
PVLAN promiscuous trunk port
To Next Page
Loading...
