Cisco Catalyst 4500 Series - Page 336

6-24
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 6 Programmability
Monitoring Programmability
show virtual-service detail [name
virtual-services-name]
Displays a list of resources committed to a specified application, including attached
devices.
show virtual-service list Displays the list of applications installed in the virtual services container. The
following is sample output for this command:
Switch# show virtual-service list
Virtual Service List:
Name Status Package Name
-----------------------------------------------------------------------
dmi Activated cat4500e_20160725-212823.ova
show virtual-service storage pool
list
Displays an overview of storage locations (pools) used for virtual service containers.
show virtual-service storage volume
list
Displays an overview of storage volume information for virtual service containers.
show virtual-service version name
virtual-services-name installed
Displays the version of an installed application. For example:
Switch# show virtual-service version name dmi installed
Virtual service dmi installed version:
Name : Netconf-Yang
Version : 1.0.0
show virtual-service tech-support Displays container-based information.
show virtual-service redundancy
state
Displays synchronization status
show virtual-service utilization
statistics CPU
Displays virtual service CPU utilization statistics.
Table 6-1 Monitoring Programmability
Show Command Purpose