Cisco Catalyst 4500 Series - Page 1600

Index
IN-34
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL-23818-01
described 60-5
differences from traps 60-5
enabling 60-14
limiting access by TFTP servers 60-15
limiting system log messages to NMS 58-9
manager functions 60-3
notifications 60-5
overview 60-1, 60-4
status, displaying 60-16
system contact and location 60-14
trap manager, configuring 60-13
traps
described
60-3, 60-5
differences from informs 60-5
enabling 60-11
enabling MAC address notification 4-24
enabling MAC move notification 4-26
enabling MAC threshold notification 4-28
overview 60-1, 60-4
types of 60-11
users 60-6, 60-9
versions supported 60-2
SNMP commands 70-4
SNMP traps
REP
22-14
SNMPv1 60-2
SNMPv2C 60-2
SNMPv3 60-2
software
upgrading
9-13, 10-12
software configuration register 3-26
software QoS, on Sup 6-E 40-39
software switching
description
33-5
interfaces 33-6
key data structures used 35-7
source IDs
call home event format
65-22
SPAN
and ACLs
55-5
configuration guidelines 55-7
configuring 55-7 to 55-10
destination ports 55-5
IDS 55-2
monitored port, defined 55-4
monitoring port, defined 55-5
received traffic 55-3
sessions
defined
55-3
source ports 55-4
transmitted traffic 55-4
VLAN-based 55-5
SPAN and RSPAN
concepts and terminology
55-3
default configuration 55-6
displaying status 55-24
overview 55-1
session limits 55-6
SPAN enhancements
access list filtering
55-13
configuration example 55-15
CPU port sniffing 55-10
encapsulation configuration 55-12
ingress packets 55-12
packet type filtering 55-14
spanning-tree backbonefast command 23-16
spanning-tree cost command 20-16
spanning-tree guard root command 23-2
spanning-tree portfast bpdu-guard command 23-8
spanning-tree portfast command 23-7
spanning-tree port-priority command 20-13
spanning-tree uplinkfast command 23-12
spanning-tree vlan
command
20-9
command example 20-9
spanning-tree vlan command 20-8
spanning-tree vlan cost command 20-16
spanning-tree vlan forward-time command 20-19