Cisco Catalyst 4500 Series - Page 1601

Index
IN-35
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-23818-01
spanning-tree vlan hello-time command 20-18
spanning-tree vlan max-age command 20-18
spanning-tree vlan port-priority command 20-13
spanning-tree vlan priority command 20-17
spanning-tree vlan root primary command 20-10
spanning-tree vlan root secondary command 20-12
speed
configuring interface
7-19
speed command 7-20
SSO
configuring
11-10
SSO operation 11-4
SST
description
20-22
interoperability 20-24
static ACL, removing the requirement 51-28
static addresses
See addresses
static routes
configuring
3-11
verifying 3-12
statistics
802.1X
46-14
displaying 802.1X 44-113
displaying PIM 35-27
LLDP 29-14
LLDP-MED 29-14
MKA 43-5
SNMP input and output 60-16
sticky learning
configuration file
47-6
defined 47-5
disabling 47-6
enabling 47-5
saving addresses 47-6
sticky MAC addresses
configuring
47-7
defined 47-4
storing captured packets to a .pcap file, Wireshark 56-4
Storm Control
displaying
54-6
enabling Broadcast 54-3
enabling Multicast 54-4
hardware-based, implementing 54-2
overview 54-1
software-based, implementing 54-2
STP
and REP
22-6
bridge ID 20-2
configuring 20-7 to 20-20
creating topology 20-5
defaults 20-7
disabling 20-20
enabling 20-8
enabling extended system ID 20-9
enabling Per-VLAN Rapid Spanning Tree 20-20
EtherChannel guard
disabling
23-6
forward-delay time 20-19
hello time 20-17
Layer 2 protocol tunneling 27-13
maximum aging time 20-18
overview 20-1, 20-3
per-VLAN rapid spanning tree 20-6
port cost 20-15
port priority 20-13
root bridge 20-10
stratum, NTP 4-2
stub routing (EIGRP)
benefits
32-17
configuration tasks 32-18
configuring 32-14
overview 32-13, 32-14
restrictions 32-17
verifying 32-18
subdomains, private VLAN 42-2
summer time 4-13
supervisor engine