Index
IN-27
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
changing the quiet period 45-84
client, defined 45-3, 47-2
configuration guidelines 45-29, 47-6
configure ACL assignments and redirect URLs 45-38
configure switch-to-RADIUS server
communication
45-32
configure with Authentication Failed 45-70
configure with Critical Authentication 45-62
configure with Guest-VLANs 45-57
configure with MAC Authentication Bypass 45-60
configure with VLAN User Distribution 45-68
configure with Voice VLAN 45-72
configuring
Multiple Domain Authentication and Multiple
Authorization
45-34
RADIUS server 47-10
RADIUS server parameters on the switch 47-9
configuring Fallback Authentication 45-77
configuring Guest-VLAN 45-32
configuring manual re-authentication of a
client
45-94
configuring with Unidirectional Controlled
Port
45-66
controlling authorization state 45-5
default configuration 45-27, 47-6
described 45-1
device roles 45-2, 47-2
displaying statistics 45-125, 47-14
enabling 45-29
802.1X authentication 47-9
enabling multiple hosts 45-83
enabling periodic re-authentication 45-81
encapsulation 45-3
host mode 45-6
how 802.1X fails on a port 45-25
initiation and message exchange 45-4
method lists 45-29
modes 45-6
multidomain authentication 45-23
multiple-hosts mode, described 45-7
port security
multiple-hosts mode
45-7
ports not supported 45-5
pre-authentication open access 45-8
resetting to default values 45-95
setting retransmission number 45-86
setting retransmission time 45-85
switch
as proxy
47-2
switch supplicant
configuring
45-88
overview 45-24
topologies, supported 45-26
using with ACL assignments and redirect
URLs
45-20
using with port security 45-19
voice aware 802.1x security
configuring
45-74
described 45-22, 45-73
with Critical Authentication 45-14
with Guest VLANs 45-11
with MAC Authentication Bypass 45-12
with Unidirectional Controlled Port 45-15
with VLAN assignment 45-10
with VLAN User Distribution 45-16
port-channel
see EtherChannel
port-channel interfaces
See also EtherChannel
creating
5-45, 25-7
overview 25-2
port-channel load-balance
command
25-13
command example 25-13
port-channel load-balance command 25-14
port cost (STP)
configuring
21-15
port description TLV 30-2
PortFast