Cisco Catalyst IR1821 Installation Guide

Figure 21: Module Placement
Step 3 After the module is properly inserted, tighten the module plate to the panel with the two screws. The screws
should be torqued to 2-3 in-lb (0.2-0.3 Newton meter).
Step 4 The installation is now complete.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
53
SSD Module
Installing an SSD Module

Cisco Catalyst IR1821 Specifications

General

Brand	Cisco
Model	Catalyst IR1821
Category	Network Router
Language	English