Configuring Quality of Service
Defining General Settings
ESW 500 Series Switches Administration Guide 308
12
Configuring Bandwidth
The
Bandwidth Page
allows network managers to define the bandwidth settings
for specified egress and ingress interfaces.
Rate Limits and Shaping are defined per interface:
• Rate Limit sets the maximum bandwidth allowed on ingress interfaces.
• Shaping Rate sets the maximum bandwidth allowed on egress interfaces. On
GE ports, traffic shape for burst traffic (CbS) can also be defined.
STEP 1 Click Quality of Service > General > Bandwidth. The
Bandwidth Page
opens:
Bandwidth Page
The
Bandwidth Page
contains the following fields:
• Ports — Indicates that the bandwidth settings of the ports are described in the
page.
• EtherChannels — Indicates that the bandwidth settings of the EtherChannels
are described in the page.
• Interface — Displays the interface (port or EtherChannel) for which the
Bandwidth settings are made.
To Next Page
Loading...
