4. Installing the radio
4.1. Installing the radio using the multi-axis mounting
bracket
IMPORTANT
The FM Ponte transceiver kit includes two multi-axis mounting
brackets (Fluidmesh part number FM-BRKT).
The FM1200 Volo transceiver kit includes a single FM-BRKT
mounting bracket.
The FM-BRKT mounting kits do not need to be purchased
separately.
The diagram below shows the components and assembly sequence for
installing the radio using the Fluidmesh multi-axis mounting bracket.
The table below shows the components and quantities of each component
used in each FM-BRKT assembly:
Component number Description Quantity
01 Pole Mount 1
02 Swivel Rod 1
03 Radio transceiver 1
04 U-bolt 1
Installing the radio
© 2021 Cisco and/or its affiliates. All rights reserved. Page 15 of 132
To Next Page
Loading...
