• Total Throughput (RX + TX): Rate of successful combined
message delivery over the wireless link.
The Ethernet Statistics section shows real-time values for each of the
following Ethernet-related values:
• TX Throughput: Rate of successful message transmission by the
unit over the wireless link.
• RX Throughput: Rate of successful message reception by the unit
over the wireless link.
• Total Throughput (RX + TX): Rate of successful combined
message delivery over the wireless link.
The Link Utilization section shows a comparative graph and values for
each of the following:
• Blue: Link bandwidth that is currently un-utilized.
• Orange: link bandwidth that is currently in use by the local Cisco FM
Ponte kit unit.
• Green: link bandwidth that is currently in use by the remote Cisco
FM Ponte kit unit.
Plotting and interpreting the wireless links
NOTE
The statistical information refresh period is:
• One second for Fluidity (mobile) networks.
• Six seconds for stationary networks.
To plot and interpret all wireless links in the current network, click the FM
QUADRO™ link in the upper left part of the settings menu (below).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 54 of 132
To Next Page
Loading...
