A channel-utilization bar shows uplink and downlink utilization for
the selected pair of devices, as well as link utilization by other links.
Viewing live RSSI data for a wireless link
To see an RSSI information chart for any wireless link between a
stationary radio and mobile radio, click the Click to expand link on the
mobile radio’s information widget (below).
A typical RSSI information chart is shown below:
When an RSSI information chart is shown for a wireless link, the chart
shows the following information:
• The bold dashed line on the upper part of the graph is the RSSI
envelope for the wireless link between the relevant mobile radio and
the stationary radio to which it is currently connected.
• The solid lines on the upper part of the graph are RSSI readings for
other stationary and mobile radios that are part of the network.
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 61 of 132
To Next Page
Loading...
