Cisco Linksys E2100

Linksys E2100 Router Setup Guide

Cisco Linksys E2100 Specifications

General

Category	Wireless Router
Frequency Band	2.4 GHz
Maximum Wireless Speed	300 Mbps
Brand	Cisco
Model	E2100
Wireless Standards	802.11n
Security	WPA, WPA2, WEP
Antennas	2 internal antennas
Dimensions	7.9 x 6.3 x 1.3 in
Ports	1 x 10/100M WAN; 4 x 10/100M LAN

Summary

Configure QoS Settings (MAC Method)

Login and Access Router Settings

Log in to the router using the default IP address and credentials, then navigate to the Applications & Gaming tab.

Enable Internet Access Priority

Select the QoS option and enable 'Internet Access Priority' by choosing the 'Enabled' radio button.

Configure Upstream Bandwidth

Set 'Upstream Bandwidth' to 'Manual' and enter your current upload speed for optimization.

Select Category and Device Information

Choose 'Applications' as the category and prepare to enter device-specific information.

Name and Enter Device MAC Address

Enter a unique name and the MAC address for the device requiring traffic prioritization.

Set Device Priority and Apply

Assign a priority level, such as 'High', to the device and click 'Apply' to save configuration.

Finalize QoS Configuration

Repeat for all devices, save all settings, and reboot the router to implement QoS.