Cisco ME 3400 - Page 1113

Index
IN-27
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
MSDP (continued)
default configuration 43-3
dense-mode regions
sending SA messages to 43-15
specifying the originating address 43-16
filtering
incoming SA messages 43-13
SA messages to a peer 43-11
SA requests from a peer 43-9
join latency, defined 43-6
meshed groups
configuring 43-14
defined 43-14
originating address, changing 43-16
overview 43-1
peer-RPF flooding 43-2
peers
configuring a default 43-3
monitoring 43-17
peering relationship, overview 43-1
requesting source information from 43-7
shutting down 43-14
source-active messages
caching 43-6
clearing cache entries 43-17
defined 43-2
filtering from a peer 43-9
filtering incoming 43-13
filtering to a peer 43-11
limiting data with TTL 43-12
monitoring 43-17
restricting advertised sources 43-8
support for 1-9
MSTP
boundary ports
configuration guidelines 15-15
described 15-6
MSTP (continued)
BPDU filtering
described 16-3
enabling 16-8
BPDU guard
described 16-3
enabling 16-7
CIST, described 15-3
CIST regional root
CIST root 15-5
configuration guidelines 15-15, 16-6
configuring
forward-delay time 15-23
hello time 15-23
link type for rapid convergence 15-25
maximum aging time 15-24
maximum hop count 15-24
MST region 15-16
neighbor type 15-25
path cost 15-21
port priority 15-19
root switch 15-17
secondary root switch 15-18
switch priority 15-22
CST
defined 15-3
operations between regions 15-3
default configuration 15-14
default optional feature configuration 16-5
displaying status 15-27
enabling the mode 15-16
EtherChannel guard
described 16-3
enabling 16-9
extended system ID
effects on root switch 15-17
effects on secondary root switch 15-18
unexpected behavior 15-17