Index
IN-39
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
root switch
MSTP 15-17
STP 14-15
route calculation timers, OSPF 35-31
route dampening, BGP 35-60
routed packets, ACLs on 31-37
routed ports
configuring 35-3
defined 9-5
IP addresses on 9-23, 35-3
route-map command 35-105
route maps
BGP 35-52
policy-based routing 35-103
router ACLs
defined 31-2
types of 31-4
route reflectors, BGP 35-59
router ID, OSPF 35-33
route selection, BGP 35-50
route summarization, OSPF 35-31
route targets, VPN 35-83
routing
default 35-2
dynamic 35-2
IPv6 traffic 36-2
redistribution of information 35-99
static 35-2
routing domain confederation, BGP 35-59
Routing Information Protocol
See RIP
routing protocol administrative distances 35-98
RSPAN
characteristics 26-7
configuration guidelines 26-15
default configuration 26-9
defined 26-2
destination ports 26-6
displaying status 26-22
RSPAN (continued)
interaction with other features 26-8
monitored ports 26-5
monitoring ports 26-6
overview 1-10, 26-1
received traffic 26-4
session limits 26-10
sessions
creating 26-16
defined 26-3
limiting source traffic to specific VLANs 26-21
specifying monitored ports 26-16
with ingress traffic enabled 26-19
source ports 26-5
transmitted traffic 26-5
VLAN-based 26-6
RSPAN VLANs, and UNI VLANs 11-13
RSTP
active topology 15-9
BPDU
format 15-12
processing 15-13
designated port, defined 15-9
designated switch, defined 15-9
interoperability with 802.1D
described 15-8
restarting migration process 15-26
topology changes 15-13
overview 15-8
port roles
described 15-9
synchronized 15-11
proposal-agreement handshake process 15-10
rapid convergence
described 15-10
edge ports and Port Fast 15-10
point-to-point links 15-10, 15-25
root ports 15-10
To Next Page
Loading...
