Cisco Meraki CW91661-MR - 2.3 Security Features; 2.4 Ethernet Ports; 2.5 Power Source Options; 2.6 Factory Reset Button

7

2.3 SecurityFeatures 
The CW9166I‐MR,CW9164I‐MR  features multiple options for physically securing the access point after
installation:

1. Securityscrew –The accessorykit includesscr ews thatcan beusedto securetheaccess
point to
 themountplate.Engagingthesecurityscrewpreventsaccidentaldislodgingand
theft.


2. Kensingtonlock–Theaccesspointcontainsahardpointthatallowsittobesecuredtoany
nearby
 permanentstructureusingastandardKensingtonlock. 

2.4 EthernetPorts 
TheCW9166I‐MR,CW9164I‐MRfeaturesanEthernetRJ45portthataccepts802.3afpower(labeled
“PoE”).Thisportshould
 beusedforuplinktoyourWAN connection. 

2.5 PowerSourceOptions 
TheCW9166I‐MR,CW9164I‐MRaccesspointcanbepoweredusing eithertheMerakiACAdapteror
802.3afPoEInjector(both sold
 separately)orathird‐party802.3afPoEswitch. 

2.6 FactoryResetButton 
If the button is pressed and held for at least five seconds and then released, the CW9166I‐MR,CW9164I‐
MR will reboot and be
 restoredto its original factory settingsby deleting all configuration information
stored on theunit.