EasyManua.ls Logo

Cisco Meraki MS390 Series - Factory Reset Button; Package Contents

Cisco Meraki MS390 Series
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Factory Reset Button
If the button is pressed and held for at least 10 to 15 seconds and then released, the switch will reboot and be restored
to its original factory settings by deleting all configuration information stored on the unit.
Package contents
In addition to the MS switch, the following are provided:
2 x (19 inch) Mounting brackets and screw kit that includes:
8 x Flat-head screws
4 x number-12 pan-head screws
4 x number-10 pan-head screws
1 x (4 x 20 mm) pan-head screw
1 x Ground lug screw and ring terminal
4 x Rubber mounting feet
1 x Default Power Supply Unit
3 Pre-installed Fans
Cable guide
Installation instruction pamphlet
Regulatory Compliance and Safety Information handbook
6

Related product manuals