Cisco NCS 4200 Series - Showing the MAC Addresses of a Specific Service Instance

DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays the secured addresses on all the service
instances.
show ethernet service instance mac security address
Example:
Device# show ethernet service instance mac
security address
Step 2
Displays the secure MAC address on the service
instances.
show mac address-table secure
Example:
Device# show mac address-table secure
Step 3
Returns to user EXEC mode.end
Example:
Device# end
Step 4
Showing the MAC Addresses of a Specific Service Instance
SUMMARY STEPS
1.
enable
2.
show ethernet service instance id id interface type number mac security address
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
61
Configuring MAC Address Security on Service Instances and EVC Port Channels
Showing the MAC Addresses of a Specific Service Instance