Cisco NCS 4200 Series - Showing the MAC Security Statistics of a Specific Service Instance; Showing the MAC Security Statistics of All Service Instances on a Specific Bridge Domain

Showing the MAC Security Statistics of a Specific Service Instance
This section describes how to display the MAC security statistics of a specific service instance.
SUMMARY STEPS
1.
enable
2.
show ethernet service instance id id interface type number mac security statistics
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays the MAC security statistics of a specific
service instance.
show ethernet service instance id id interface type
number mac security statistics
Example:
Device# show ethernet service instance id 100
Step 2
interface gigabitethernet1/1 mac security statistics
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Showing the MAC Security Statistics of All Service Instances on a Specific
Bridge Domain
Perform this task to display the MAC security statistics of all the service instances on a specific bridge domain.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
63
Configuring MAC Address Security on Service Instances and EVC Port Channels
Showing the MAC Security Statistics of a Specific Service Instance