Cisco NCS 4200 Series - Showing the Last Violation Recorded on Each Service Instance on a Specific Bridge Domain

SUMMARY STEPS
1.
enable
2.
show bridge-domain bridge-id mac security statistics
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays the MAC security statistics of all service instances
that belong to a specific bridge domain.
show bridge-domain bridge-id mac security
statistics
Example:
Device# show bridge-domain 100 mac security
statistics
Step 2
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Showing the Last Violation Recorded on Each Service Instance on a Specific
Bridge Domain
Perform this task to display the last violation recorded on each service instance on a specific bridge domain.
Service instances on which there have been no violations are excluded from the output.
SUMMARY STEPS
1.
enable
2.
show bridge-domain bridge-id mac security last violation
3.
end
Layer 2 Configuration Guide for Cisco NCS 4200 Series
64
Configuring MAC Address Security on Service Instances and EVC Port Channels
Showing the Last Violation Recorded on Each Service Instance on a Specific Bridge Domain