Cisco NCS 4200 Series - Clearing All Dynamically Learned Secure MAC Addresses on a Service Instance

DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays information about the last violation recorded on
each of the service instances that belong to the bridge
domain.
show bridge-domain bridge-id mac security last
violation
Example:
Device# show bridge-domain 100 mac security
last violation
Step 2
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Clearing All Dynamically Learned Secure MAC Addresses on a Service
Instance
Perform this task to clear all dynamically learned Secure MAC addresses on a service instance.
SUMMARY STEPS
1.
enable
2.
clear ethernet service instance id id interface type number mac table
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
65
Configuring MAC Address Security on Service Instances and EVC Port Channels
Clearing All Dynamically Learned Secure MAC Addresses on a Service Instance