Cisco NCS 4200 Series - Example Displaying the MAC Security Statistics of All Service Instances; Example: Displaying the MAC Addresses on All Service Instances for a Bridge Domain; Example Displaying the Secured Service Instances for a Specific Bridge Domain

Example Displaying the MAC Security Statistics of All Service Instances
In the following example, the numbers of allowed and actual secured addresses recorded on the service instance
are displayed.
Device# show ethernet serv instance mac security statistics
Te0/0/3 ServInst 100 (bridge-domain 100)
Current secure addresses: 1
Permitted addresses: 10
Te0/0/3 ServInst 200 (bridge-domain 100)
Current secure addresses: 0
Permitted addresses: 1
Te0/0/3 ServInst 300 (bridge-domain 100)
Current secure addresses: 0
Permitted addresses: 1
Example: Displaying the MAC Addresses on All Service Instances for a Bridge
Domain
Router# show bridge-domain 10 mac security address
Port MAC Address Type
Gi0/0/3 ServInst 10 0000.00ac.ef02 sticky
Gi0/0/3 ServInst 10 0000.00ac.ef03 sticky
Gi0/0/3 ServInst 10 0000.00ac.ef04 dynamic
Gi0/0/3 ServInst 10 0000.00ac.ef05 dynamic
Gi0/0/3 ServInst 10 0000.00ac.ef06 sticky
Gi0/0/3 ServInst 10 0000.00ac.ef07 dynamic
Gi0/0/3 ServInst 10 0000.00ac.ef08 dynamic
Gi0/0/3 ServInst 10 0000.00ac.ef09 dynamic
Gi0/0/3 ServInst 10 0000.00ac.ef0a dynamic
Gi0/0/3 ServInst 10 0000.00ac.ef0b dynamic
Example Displaying the Secured Service Instances for a Specific Bridge
Domain
Router# show bridge-domain 10 mac security
Gi0/0/3 ServInst 10
MAC Security enabled: yes
Layer 2 Configuration Guide for Cisco NCS 4200 Series
70
Configuring MAC Address Security on Service Instances and EVC Port Channels
Example Displaying the MAC Security Statistics of All Service Instances