Cisco Nexus 1000V - Troubleshooting with Logs

Procedure
PurposeCommand or Action
Clears the counters for the specified interface:
switch# clear counters interface
Step 1
•
ethernet slot/port
•
vethernet number
•
mgmt 0 or mgmt0
(Optional)
Displays the interface status, which includes the counters,
for the specified interface:
switch# show interface interface
Step 2
•
ethernet slot/port
•
vethernet number
•
mgmt 0 or mgmt0
This example shows how to clear and reset the counters on Ethernet port 5/5:
switch# clear counters ethernet 5/5
switch#
Verifying the Basic Interface Parameters
Use one of the following commands to verify the configuration:
PurposeCommand
Displays the CDP status.show cdp
Displays the configured states of one or all interfaces.
show interface interface
Displays a table of interface states.show interface brief
Displays the status of Layer 2 ports.show interface switchport
Feature History for Basic Interface Parameters
Feature InformationReleasesFeature Name
The system jumbo MTU is fixed
at 9000 and cannot be changed.
4.2(1)SV1(4)System jumbo MTU
Cisco Nexus 1000V for VMware vSphere Interface Configuration Guide, Release 5.x
20
Configuring Interface Parameters
Verifying the Basic Interface Parameters