EasyManua.ls Logo

Cisco Nexus 2000 Series - Transceivers and Connectors Supported by the Cisco Nexus 2248 TP-E FEX

Cisco Nexus 2000 Series
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-9
Cisco Nexus 2000 Series Hardware Installation Guide
OL-19013-05
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
Cisco Nexus 2248TP-E FEX
For information on this fan tray, see the “Fan Tray for the Cisco Nexus 2248TP FEX” section on
page 2-14 and the fan tray specifications in the “Environmental Specifications” section on page B-4 and
the “Physical Specifications” section on page B-5. For LED descriptions, see Table D-1 on page D-2. To
replace one of these fan trays, see the “Removing and Installing the Fan Tray” section on page 3-20.
Transceivers and Connectors Supported by the Cisco Nexus 2248TP-E FEX
The Cisco Nexus 2248TP-E FEX supports SFP+ Ethernet optical and copper transceivers and optical
FEX Transceivers (FETs) for up to four fabric uplink connections to Cisco Nexus 7000 Series switches,
and it supports RJ-45 connectors for up to 48 downlink connections to hosts. For each uplink cable, you
must use the same transceiver on both ends. Table 2-2 lists the transceivers supported by this FEX for its
uplink fabric .
Figure 2-10 shows the SFP+ optical transceiver used for uplink connections. For specifications that
apply to these optical transceivers, see the “SFP+ Optical Transceiver Specifications” section on
page B-6.
1 Captive screws (2) 3 Status LED
2 Black stripe on the front indicates that this fan
tray has back-to-front airflow.
Table 2-2 Supported Transceivers and Connector for the Cisco Nexus 2248TP-E FEX Uplink Interfaces
Transceiver or
Connector
Cable
Type
Fabric
Interface
(Uplink)
Host
Interface
(Downlink) Comments
FET-10G Optical X 10 Gbps FEX transceiver
SFP-10G-LR Optical X 10 Gbps long range transceiver (up to 6.2 miles [10 km])
SFP-10G-SR Optical X 10 Gbps Short range transceiver (up to 984 feet [300 m])
SFP -H10GB-CU1M Copper X 10 Gbps Twinax, passive transceiver (3.3 feet [1 meter])
SFP -H10GB-CU3M Copper X 10 Gbps Twinax, passive transceiver (9.8 feet [3 meters)
SFP -H10GB-CU5M Copper X 10 Gbps Twinax, passive transceiver (16.4 feet [5 meters])
SFP -H10GB-ACU7M Copper X 10 Gbps Twinax, active transceiver (23.0 feet [7 meters])
SFP -H10GB-ACU10M Copper X 10 Gbps Twinax, active transceiver (32.8 feet [10 meters])
RJ-45 Copper X 100/1000 Mbps Connector

Table of Contents

Other manuals for Cisco Nexus 2000 Series

Related product manuals