Cisco Nexus 3000 series - Verifying the Advanced BGP Configuration

Send document comments to nexus3k-docfeedback@cisco.com
6-38
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Chapter 6 Configuring Advanced BGP
Verifying the Advanced BGP Configuration
switch(config-router-vrf)# neighbor 209.165.201.1 remote-as 65536
switch(config-router-vrf-neighbor)# copy running-config startup-config
Verifying the Advanced BGP Configuration
To display the BGP configuration information, perform one of the following tasks:
Command Purpose
show bgp all [summary] [vrf vrf-name] Displays the BGP information for all address
families.
show bgp convergence [vrf vrf-name] Displays the BGP information for all address
families.
show bgp ip {unicast | multicast} [ip-address]
community {regexp expression | [community]
[no-advertise] [no-export]
[no-export-subconfed]} [vrf vrf-name]
Displays the BGP routes that match a BGP
community.
show bgp [vrf vrf-name] ip {unicast | multicast}
[ip-address] community-list list-name [vrf
vrf-name]
Displays the BGP routes that match a BGP
community list.
show bgp ip {unicast | multicast} [ip-address]
extcommunity {regexp expression | generic
[non-transitive | transitive] aa4:nn
[ex
act-match]} [vrf vrf-name]
Displays the BGP routes that match a BGP
extended community.
show bgp ip {unicast | multicast} [ip-address]
extcommunity-list list-name [exact-match] [vrf
vrf-name]
Displays the BGP routes that match a BGP
extended community list.
show bgp ip {unicast | multicast} [ip-address]
{dampening dampened-paths [regexp
expression]} [vrf vrf-name]
Displays the information for BGP route
dampening. Use the clear bgp dampening
command to clear the route flap dampening
information.
show bgp ip {unicast | multicast} [ip-address]
history-paths [regexp expression] [vrf vrf-name]
Displays the BGP route history paths.
show bgp ip {unicast | multicast} [ip-address]
filter-list list-name [vrf vrf-name]
Displays the information for the BGP filter list.
show bgp ip {unicast | m
ulticast} [ip-address]
neighbors [ip-address] [vrf vrf-name]
Displays the information for BGP peers. Use the
clear bgp neighbors command to clear these
neighbors.
show bgp ip {unicast | multicast} [ip-address]
{nexthop | nexthop-database} [vrf vrf-name]
Displays the information for the BGP route next
hop.
show bgp paths Displays the BGP path information.
show bgp ip {unicast | multicast} [ip-address]
policy name [vrf vrf-name]
Displays the BGP policy information. Use the
clear bgp policy command to clear the policy
information.