Send document comments to nexus3k-docfeedback@cisco.com
13-19
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release5.0(3)U1(1)
Chapter 13 Configuring VRRP
Additional References
no shutdown
vrrp 5
priority 200
advertisement-interval 30
address 10.2.0.50
no shutdown
vrrp 100
no preempt
address 10.2.0.100
no shutdown
Additional References
For additional information related to implementing VRRP, see the following sections:
• Related Documents, page 13-19
Related Documents
Feature History for VRRP
Table 13-2 lists the release history for this feature.
Related Topic Document Title
Configuring the hot standby routing protocol Chapter 12, “Configuring HSRP”
VRRP CLI commands Cisco Nexus 3000 Series Command Reference,
Table 13-2 Feature History for VRRP
Feature Name Releases Feature Information
VRRP 5.0(3)U1(1) This feature was introduced.