Cisco Nexus 3000 series - Page 332

Send document comments to nexus3k-docfeedback@cisco.com
Index
IN-4
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release5.0(3)U1(1)
F
FIB
clearing routes
10-8
description 1-11, 10-1
displaying 10-3
feature history (table) 10-10
licensing requirements 10-3
verifying 10-10
virtualization support 10-2
VRFs 1-11
forwarding
adjacency manager
1-11
architecture 1-10, 10-1
FIB 1-11
unicast forwarding distribution module 1-11
forwarding information base. See FIB
G
gratuitous ARP
configuring
2-12
description 2-5
H
Hot Standby Router Protocol. See HSRP
HSRP
addressing
12-3
configuring a group 12-8
configuring priority 12-14
customizing 12-14
default settings 12-6
description 12-2 to 12-5
disabling the feature 12-7
enabling the feature 12-7
example configuration 12-16
feature history (table) 12-17
guidelines 12-6
licensing requirements 12-6
limitations 12-6
load sharing 12-4
messages 12-4
prerequisites 12-6
standby router 12-2
verifying configuration 12-16
virtualization support 12-5
HSRP authentication
configuring
12-10
description 12-4
HSRP object tracking
configuring
12-12
description 12-5
HSRP versions
configuring
12-8
description 12-4
HSRP virtual MAC address
configuring
12-10
description 12-2
I
iBGP
configuring route reflector
6-24
description 6-3
iBGP route reflector. See route reflector
ICMP
description
2-5
with local proxy ARP (note) 2-6
internal BGP. See iBGP
Internet Control Message Protocol. See ICMP
IP
addresses
2-2
ARP. See ARP
configuring addresses
2-7
configuring secondary addresses 2-8
default settings 2-6
description 2-1 to 2-6, ?? to 10-2