EasyManua.ls Logo

Cisco Nexus 3000 series - Logging Ip Access-List Cache Interval Seconds

Cisco Nexus 3000 series
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Send comments to nexus3k-docfeedback@cisco.com
-SM-105
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
logging ip access-list cache interval seconds
logging ip access-list cache interval seconds
Sets the number of seconds between log updates. Also if an entry is inactive for this duration, it is
removed from the cache. The range is from 5 to 86400 seconds. The default value is 300 seconds.
logging ip access-list cache interval <seconds>
Syntax Description
Command Default None
Command Modes Interface configuration mode
Command History
Examples This example shows how to log interface events:
switch# configure terminal
switch(config)# logging ip access-list cache interval 120
switch(config)#
Related Commands
interval The number of seconds between log updates.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show logging Displays the logging status.

Table of Contents

Other manuals for Cisco Nexus 3000 series

Related product manuals