Cisco Nexus 3000 series - Mpls Strip

Send comments to nexus3k-docfeedback@cisco.com
-SM-123
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
mpls strip
mpls strip
To enable the MPLS stripping feature globally, use the mpls strip command. To disable this feature, use
the no form of this command.
mpls strip
no mpls strip
Syntax Description This command has no arguments or keywords
Command Default Disabled
Command Modes Global configuration mode
Command History
Examples This example shows how to enable MPLS stripping:
switch# configure terminal
switch(config)# mpls strip
switch(config)#
This example shows how to disable MPLS stripping:
switch# configure terminal
switch(config)# no mpls strip
switch(config)#
Related Commands
Release Modification
6.0(2)U2(5) This command was introduced.
Command Description
mpls strip label Adds or deletes static MPLS labels.
clear mpls strip label
dynamic
Clears dynamic label entries.
mpls strip label-age Configures MPLS label aging.
mpls strip dest-mac Configures the destination MAC address for stripped egress frames.
show mpls strip labels Displays MPLS label configuration.