Send comments to nexus3k-docfeedback@cisco.com
-SM-168
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ptp sync interval
Related Commands Command Description
feature ptp Enables or disables PTP on the switch.
ptp Enables or disables PTP on an interface.
ptp announce Configures the interval between PTP announce messages on an interface
or the number of PTP intervals before a timeout occurs on an interface.
ptp delay-request
minimum interval
Configures the minimum interval allowed between PTP delay-request
messages when the port is in the master state.
ptp vlan Configures the PTP VLAN value on an interface.
To Next Page
Loading...
