Send comments to nexus3k-docfeedback@cisco.com
-SM-170
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ptp vlan
Related Commands Command Description
feature ptp Enables or disables PTP on the switch.
ptp Enables or disables PTP on an interface.
ptp announce Configures the interval between PTP announce messages on an interface
or the number of PTP intervals before a timeout occurs on an interface.
ptp delay-request
minimum interval
Configures the minimum interval allowed between PTP delay-request
messages when the port is in the master state.
ptp sync interval Configures the interval between PTP synchronization messages on an
interface.
To Next Page
Loading...
