Cisco Nexus 3000 series - Show Callhome Destination-Profile

Send comments to nexus3k-docfeedback@cisco.com
-SM-189
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show callhome destination-profile
show callhome destination-profile
To display the Call Home destination profile information, use the show callhome destination-profile
command.
show callhome destination-profile [profile {CiscoTAC-1 | profile-name | full-txt-destination |
short-txt-destination}]
Syntax Description
Command Default All destination profiles
Command Modes EXEC mode
Command History
Examples This example shows how to display information about the Call Home destination profiles:
switch# show callhome destination-profile
full_txt destination profile information
maximum message size:2500000
message format:full-txt
message-level:0
transport-method:email
email addresses configured:
url addresses configured:
alert groups configured:
all
short_txt destination profile information
maximum message size:4000
message format:short-txt
message-level:0
transport-method:email
<--Output truncated-->
switch#
profile (Optional) Displays information about a specific destination profile.
CiscoTAC-1 (Optional) Displays information for a CiscoTAC-1 destination profile.
profile profile-name (Optional) Displays information for a user-defined destination profile. The
name can be a maximum of 32 alphanumeric characters.
full-txt-destination (Optional) Displays information of a destination profile configured for
plain text messages.
short-txt-destination (Optional) Displays information of a destination profile configured for
short text messages.
Release Modification
5.0(3)U1(1) This command was introduced.