Cisco Nexus 3000 series - Show Diagnostic Bootup Level

Send comments to nexus3k-docfeedback@cisco.com
-SM-193
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show diagnostic bootup level
show diagnostic bootup level
To display the current bootup diagnostic level on the switch, use the show diagnostic bootup level
command.
show diagnostic bootup level
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the current bootup diagnostic level:
switch# show diagnostic bootup level
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
diagnostic bootup level Configures the bootup diagnostic level for a faster module bootup time.
show diagnostic result Displays the results of the diagnostics tests.