Cisco Nexus 3000 series - Show Event Manager Event-Types

Send comments to nexus3k-docfeedback@cisco.com
-SM-197
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show event manager event-types
show event manager event-types
To display information about the event manager event types, use the show event manager event-types
command.
show event manager event-types variable-name | all | module [slot]
Syntax Description
Defaults None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
variable-name (Optional) Displays information about the specified event type.
all (Optional) Displays information about all the event types.
module slot (Optional) Displays information about the event types on other module. The
range is from 1 to 1.
Release Modification
5.0(3)U3(1) This command was introduced.