Cisco Nexus 3000 series - Show Event Manager Policy-State

Send comments to nexus3k-docfeedback@cisco.com
-SM-202
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show event manager policy-state
show event manager policy-state
To display information about a system policy, use the show event manager policy-state command.
show event manager policy-state system-policy-name
Syntax Description
Defaults None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about a system policy:
switch(config)# show event manager policy-state __pfm_fanabsent_any_singlefan
Policy __pfm_fanabsent_any_singlefan
Cfg count : 300
Hash Count Policy will trigger if
----------------------------------------------------------------
0 10 290 more event(s) occur
switch(config)#
Related Commands
system-policy-name Name of the internal system policy. The policy name can be any alphanumeric
string up to 29 characters.
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
show event manager
environment
Displays information about the configured environment variables.
show event manager
event-types
Displays information about the event manager event types.
show event manager
history events
Displays the history of events for all policies.
show event manager
script system
Displays information about the script policies.
show running-config
eem
Displays information about the running configuration for the Embedded
Event Manager (EEM).