Cisco Nexus 3000 series - Page 239

Send comments to nexus3k-docfeedback@cisco.com
-SM-215
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging level
switch# show logging level port-channel
Facility Default Severity Current Session Severity
-------- ---------------- ------------------------
eth_port_channel 5 5
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
switch#
This example shows how to display the Address Resolution Protocol (ARP) logging severity level
configuration:
switch# show logging level arp
Facility Default Severity Current Session Severity
-------- ---------------- ------------------------
arp 2 2
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
switch#
Related Commands Command Description
logging level Configures the facility logging level.